About us
Point of contactC&D Access Training Ltd
Boasting a brand-new, state-of-the-art training facility, we offer a full range of world-class NDT courses. We pride ourselves on having exceptionally high standards of equipment and offer a clean and comfortable environment in which to prosper. With safety and care at the heart of everything we do, expect impeccable customer service and unbeatable pricing. Conveniently located in Newcastle Upon Tyne, we are the first choice for all your training needs.
About the Company
Established: 2020
Location: Newcastle Upon Tyne
Training Types
PCN
ISO9712 (Other)
ASNT
SNT-TC-1A
NDT Level 2 Courses
We have courses available in the following locations:
Newcastle, UK
Eddy Current Testing Welds
Weld Inspector
Visual Testing
Magnetic Particle Testing
Ultrasonic Testing Welds/Castings/Forgings
Penetrant Testing
Ultrasonic Testing - Pipe
Ultrasonic Testing - Plate
Contact C&D Access Training Ltd
AINDT
The leading certification and membership body for NDT in Australia.
ASME IX
ASME Section IX specifies the requirements for the qualification of welders and the welding procedure specifications.
ASNT
The American Society for Nondestructive Testing, Inc. or ASNT is a technical society for nondestructive testing professionals.
AWS D1.1
This code covers the requirements associated with welding sheet steel having a minimum specified yield point no greater than 80 ksi
BS 4872
BS 4872 applies to a wide range of general fabrication work where an approved welding procedure test is not required.
BS EN ISO 9001
ISO 9001 is defined as the international standard that specifies requirements for a quality management system (QMS).
BSI Registered
The British Standards Institution (BSI) is a service organization that produces standards across a wide variety of industry sectors.
CSWIP
Established for over 50 years the Certification Scheme for Personnel (CSWIP), is a world leader in personnel competence assurance certification.
DROPS
DROPS Global offer a range of Dropped Object Prevention Awareness and Training programmes, each derived from industry lessons learned and associated best practice and applicable across the full supply chain.
EASA Part 145
European Aviation Safety Agency (EASA) Part 145 Approval is a company level certification to the European Commission Regulation standards of design, production, maintenance and operation of aircraft components.
EN 287
EN 287-1 is a European Standard that defines the qualification testing of welders for the fusion welding of steels.
EN4179
EN4179:2017 defines the minimum training and certification requirements for personnel working in the European aerospace sector.
FAA CRS
The term repair station refers to a mainte- nance facility that has a certificate issued by the Federal Aviation Administration (FAA)
FPAL
First Point Assessment (FPAL) is the world's leading oil & gas industry supply chain database.
HOIS
HOIS JIP for good practice to improve the effectiveness of in-service non-destructive testing in the energy industry.
IIP
Investors in People is a standard for people management, offering accreditation to organisations that adhere to the Investors in People Standard.
IRATA
The rope access technique developed by IRATA is used in a wide range of repair, maintenance, inspection and access work.
IRATA Level 1
IRATA is an acronym for the Industrial Rope Access Trade Association, that was formed in the UK in the late 1980’s, to solve maintenance challenges in the offshore oil and gas industry.
IRATA Level 2
IRATA is an acronym for the Industrial Rope Access Trade Association, that was formed in the UK in the late 1980’s, to solve maintenance challenges in the offshore oil and gas industry.
IRATA Level 3
IRATA is an acronym for the Industrial Rope Access Trade Association, that was formed in the UK in the late 1980’s, to solve maintenance challenges in the offshore oil and gas industry.
ISO 1400
ISO 14001 is the international standard that specifies requirements for an effective environmental management system (EMS)
ISO 14001
ISO 14001 is the international standard that specifies requirements for an effective environmental management system (EMS)
ISO 15614
Specification and qualification of welding procedures for metallic materials.
ISO 17020
General Criteria for the Operation of Various Types of Bodies Performing Inspection
ISO 17024
Conformity assessment — General requirements for bodies operating certification of persons
ISO 17025
ISO 17025 is the international standard for testing and calibration laboratories.
ISO 45001
ISO 45001 is an International Standard that specifies requirements for an occupational health and safety (OH&S) management system, with guidance for its use.
ISO9712 (Other)
Non-destructive testing — Qualification and certification of NDT personnel.
LEEA
The Lifting Equipment Engineers Association (LEEA) is established across the world as the leading trade association for all those involved in the lifting industry.
Lloyd's Register Accreditation
Accreditation is central to stakeholder confidence, ensuring assessor competence and maintaining the impartiality of the decision-making process.
NADCAP
The National Aerospace and Defense Contractors Accreditation Program is a global cooperative accreditation program for aerospace engineering, defense and related industries.
NAS 410
NAS410 "Certification" is a written statement by an employer that an individual has met the applicable requirements of this standard.
None
PCN
The PCN Scheme is maintained by BINDT and is accredited by the United Kingdom Accreditation Service (UKAS) to provide independent evidence that PCN satisfies the requirements of relevant British, European and international standards.
PCN Aero
In accordance with the requirements within EN 4179, the NANDTB is entitled to recognise equivalency, and in this regard the UK National Aerospace NDT Board has agreed to recognise that the PCN/GEN Appendix A (aerospace sector) certificates.
RINA
The first objective of RINA Rules for the classification of ships is ensuring that vessels are maintained and operated in such a way to minimize the risks to life, environment and property
SNT-TC-1A
SNT-TC-1A: Personnel Qualification and Certification in Nondestructive Testing provides guidelines for employers to establish in-house certification programs for the qualification and certification of nondestructive testing personnel.
UVDB
UVDB is the utility industry pre-qualification system used by the utilities sector in the UK to manage risk within the supply chain and comply with EU regulations.
Social Media: